To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.
Features:
Specs:
The Switchblade retractable hard tonneau cover provides you with security and weather protection for your truck bed, easy accessibility to your cargo, and the flexibility to haul large items that require full bed capacity whenever needed. You can install the cover without assistance in approximately 10 minutes, and you can completely remove it from your vehicle's bed just as quickly. The tonneau deck is constructed of a vinyl fabric top sheet that is bonded to rigid aluminum panels, combining the seamless appearance of a soft cover with the security features of a hard cover.
Simple, 1-Person Installation
To install the cover, set the canister on the bulkhead of your truck. Make sure that it's square with your bed. Bolt the side rails to the tabs on the canister.
Secure the rails to your truck bed side rails using 2 clamps per side. Slide the clamp onto the rail, flip the pivot arm up so it is under the bed rail lip, and tighten the clamp in place with the twist knob. Shims are included for trucks with tapered beds.
Each clamp at the tailgate end of the rails has a supplemental kickstand to help level the rails and prevent overtightening during installation. To install the kickstand, simply slide it into the grip handle at the bottom of the clamp. Rotate the kickstand so the foot rests squarely against the side wall of the truck bed, and tighten in place.
Mount the top cover plate to the canister with the included hardware. Attach the drain tubes to the canister and route each tube out of the OEM drain holes in the floor of your bed.
To hold the pull strap off the floor of your truck bed, apply the adhesive hook-and-loop fastener strip onto the underside of a rail at your desired location.
Remove or Reinstall in 10 Minutes
After the initial installation, the tonneau cover can be completely removed or reinstalled in approximately 10 minutes. The Switchblade is great for whenever you need to haul large items that require full bed capacity from front to back and side to side. After your large haul is complete, you can easily reinstall the cover to protect your truck bed again.
To utilize your entire truck bed, detach the canister from the side rails by removing the bolts on either side with a wrench. Then take the side rails off your truck by removing the clamps with the same wrench. Wrap the pull-strap around the canister and use it to lift the canister off your vehicle.
Retractable Cover with Built-In Pull Strap
To retract the Switchblade, simply squeeze the pinch grips located underneath the cover near the center of the tailgate to activate a heavy-duty tension spring. The spring automatically retracts the cover into the canister at the bulkhead of your truck bed. This provides quicker, easier access to your truck bed when compared with manual retractable covers that have no spring-loaded assist.
A built-in pull strap helps you extend the cover over your bed. As you pull, the tonneau will glide smoothly along tracks in the side rails until it reaches the tailgate and secures in place. You can also use the rear plate of the tonneau cover to pull it closed.
Compact, Angled Canister
The cover retracts into a canister located at the front of your truck bed, giving you unrestricted visibility out of your rear window. The canister also protects the stored cover from the elements. And the compact, angled design allows for maximum clearance for your tools and cargo.
Water Management System
The Switchblade rails feature a water management system that channels excess water into the canister. This prevents water from getting into your bed or freezing in your tonneau cover rails during cold temperatures. Drain tubes attached to the bottom of the canister remove water through the OE drain holes in the floor of your truck bed.
Flush-Mount Design
The black powder-coated side rails sit 1/8" above your truck bed rails for a flush appearance. This low-profile design is aerodynamic to reduce wind drag, and it helps to improve gas mileage when the cover is closed.
Stylish and Heavy-Duty Construction
The Switchblade deck is constructed of a vinyl top layer bonded to heavy-duty aluminum slats. This ArmorTek deck looks like a soft tonneau cover with no visible seams, but has the strength and security of a hard tonneau cover. A large seal at the rear of the bed closes the gap between the cover and tailgate to create a barrier to prevent water from entering the truck bed.
Security
The Switchblade provides excellent protection for your cargo when used in conjunction with a closed and locked tailgate. Both the pinch grips and pull strap are located underneath the rear plate, which makes them inaccessible when your truck bed is closed. The heavy-gauge aluminum panels are better at preventing theft when compared with soft covers that can be cut or punctured with a knife. The panels are also more effective at preventing theft than tri-fold hard tonneau covers because the panels cannot be pried open at any point along the rails.
California residents: click here
Average Customer Rating: 4.4 out of 5 stars (268 Customer Reviews)
You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.I installed this on my 2017 RAM without any issues. The instructions manual is a little difficult to follow but I found an installation video specifically for my truck and it made the whole process easy. I added the extra shim per the video and it works smoothly. I took my time and it was maybe an hour to install. I'm sure I could remove it in 10 minutes or less.
etrailer had my cover here in about a week. The website made it easy to find the one that fits my vehicle and with the [sale] price I was able to get the retractable instead of the roll up I had been looking at.
The cover came very quickly and I got installed the next day. Works great and hope to have many good years use out of it.
Within three months the seals along the rails warped in the sun making it nearly impossible to slide the cover open or closed. I have upgraded my cover to a Bakflip MX4. I can’t share photos because I discarded the whole cover.
Just installed this afternoon, so not a lot of experience yet. I installed by myself in about 1 1/2 hours. The instructions were clear and brief. I had a little trouble getting the front clamps in place, but that was due to the thickness of a brand new spray-in bed liner, it was pretty thick. Once everything was in and adjusted the cover works good and looks like it will keep most of the weather out.
This is my second switchblade, I like the security and look. It allows more water in the bed than expected. The packaging could be better this unit showed up with serious damage to the box and the drain tubes were broken due to placement under the canister in the box. Etrailer sent replacement drain tubes soon as I called. Great service!
The bad:
1. The product showed up with damage. Box looked to be taped to fix it being dropped.
2. The metal parts that rest on the bed rail were bent.
3. They talk about shims in the instructions and the video but do not show where the shims are. I did have to remove them to help even out the distance the rails are between the front and back.
The good:
1. All parts were still in the box.
2. I was able to straighten the metal parts and install the product.
3. The installation video was very helpful.
Does not fit entirely flush with the trucks bed as the picture shows. Called customer service for help with the order and they tried to upsell me on another cover. I specifically stated that I didn’t see the cover with the matte finish. Website has poorly posted pics. Buyer beware. I’ll pay $[XX] to return the cover and will buy from [online vendor]
Received my bed cover last night in a wore out beat up box. parts hanging out of it. When I opened it it was full of returned items from other customers. When I asked to discount and speed up shipment on the replacement I was told nothing he could do. I have been a loyal customer and I'm not happy with the way this has been handled.
Looks great. Should be durable enough for me and my application. Appears to be well made and was fairly easy to install. I was replacing an older well used cover for my truck that was a dealer installed after market cover that was merely worn out. My brother and I installed this Slingshot in a little less than an hour. A person with with average skills should be able to install this cover with minimal issue. Certainly is easier with two people but not difficult.
Dear Ranger owners. This product is one inch short. Be aware. If you got a one inch thick liner, this is perfect. If not, this product will not be flush with the front bed. If you make it flush, then it is one inch short. etrailer tells me to return it with xxx return fee. And they would charge me for restocking fee. Haha what an amazing policy. Now that customer received it, they know customers wont return with heavy return fee. STAY AWAY.
After searching for a bed cover I came back to etrailer because of the service and quality of my 5th wheel hitch that I purchased from them when I bought my new truck. I received my new bed cover and it is awesome just as described and fit perfect and took about 30 min to install it. etrailer is the place to buy all your truck or trailer needs . As you can see from the pictures it covers up my diesel tank and the 5th wheel hitch when not in use and when you pull the 5th wheel then just roll in into the canaster.
Cover was very easily to install. However wasn’t pleased with how the cover of box was bowed and never sealed to truck bed, or the cover didn’t fit up to top cap. Wasn’t impressed with how quick the seals on the end caps tore off.
The buying process - is very easy, and shipping - is sooner than expected at my door. Installation of the cover is also very easy. The quality is very good and it looks good.
easy install, works great, allows me to keep the bed cover on while using my 5th wheel.
Seals didn’t last long. I had to replace the tailgate seal twice and finally siliconed it in place. Other than that it’s been a good bed cover.
The cover looks great and DOES work on a 2020 Ram 3500 8'bed. It was easy to install. It was missing 2 hex bolts to connect the rails to the canister but a few dollars at the local hardware store fixed that. The only concern I have is the canister cover is a little warped, either from shipping or manufacturing, allowing the cover to retract in the canister without touching the brush on the canister cover. This could allow dirt and dust into the canister later as well. All in all great looking cover that does what its intended to do.
Excellent product. Helped shield product from weather ( snow,rain ). Seal is not perfect so some moisture does get through, but significantly better the if not covered. Switchblade concept very convenient as can open and close as needed. As with anything required periodic maintenance. The side channels where the cover slides in do get dirty from the environment and over time require cleaning as the dirt impedes the sliding of the cover. Also do need to be watchful for the small screws at the back end of the cover (by the rear truck hatch). They do get loose over time. If not careful they come out and may cause the cover to come apart. I do not consider this as unusual. Everything requires periodic maintenance.
Given the choice I would still purchase this product. Cannot think of what might make the product better or function more smoothly. It is certainly worth the investment.
If desired can take it apart if needed to access the unobstructed truck bed. I have not had the need to take it of though.
Shipped immediately and arrived in a couple of days. Unfortunately the unit comes in two boxes and UPS split them and delivered them over two days. This was not etrailer's fault!
The unit was exactly as described and fit my 2021 Ram Rebel like a glove. The only problem I had was the end caps were reversed on the box cover making it impossible to get the Philips head screws to catch. Once I figured that out they went right in.
I've bought many products from etrailer over the years and have never been disappointed. I highly recommend them.
This will be the third time that I’ve bought from etrailer and I soon will be back again, for my new F250 always taken care of in the most professional way, I ordered the retractable bed cover for a birthday present for my wife, when it was delivered it look like it been through a battle took pictures and sent it to etrailer, With no hesitation and pure professionalism they took care of me right away and still made my wife’s birthday on time the product has always been good I know I haven’t had a chance to put it on yet, but the delivery this time look like a brand new product on a mark on the box, the delivery company which I will not mention, I just got substantial raises in the way they deliver products this is sad but etrailer even took care of their unprofessionalism, so everybody that reads this hats off to Martie etrailer, They have created a loyal customer and a happy wife thank you etrailer For what you do.
This is a nice enough cover and fairly easy to install but does not keep the bed of the truck dry like some other covers I have owned.
The products are great when you get the right stuff ordered twice through you guys got the wrong parts both times not ordering from you again
The Pace Edwards Switchblade has performed well after a year. It's still holding up and is a great way to protect your bed and belongings. I use a slider hitch from Pull-Rite to tow and as long as the upper hitch plate is removed there is absolutely no interference. Also the cover does NOT interfere with towing when it's retracted. I would buy this again and recommend it for its durability and good looks.
Item's box is well made and sturdy, however UPS shipping still was able to damage the item. Metal supports that hold the canister were bent. Was able to straighten them and installed it on my Ram 3500. Everything works like it is supposed to and you can't even tell it was damaged in shipping. Would have given this a 5-star rating but shipping and receiving the item in good order is part of the process.
Easy to install. looks and works great!!
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
7/24/2020
I still like this cover. It is super easy to use and I like that it locks. I especially like that you close it before the tailgate. Im not sure the gasket under the endcaps will last long as it is cracking.